|本期目录/Table of Contents|

[1]杨志春,吴锋,余仕成.针束型回热器熵产率的分析[J].武汉工程大学学报,2012,(9):54-58.[doi:103969/jissn16742869201209012]
　YANG Zhi chun,WU Feng,YU Shi cheng.Analysis of entropy generation rate in pinarray stack[J].Journal of Wuhan Institute of Technology,2012,(9):54-58.[doi:103969/jissn16742869201209012]
点击复制


针束型回热器熵产率的分析(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2012年9期
页码:
54-58
栏目:
机电与信息工程
出版日期:
2012-10-10

文章信息/Info

Title:
Analysis of entropy generation rate in pinarray stack
文章编号:
16742869(2012)09005405
作者:
杨志春1; 吴锋2;  余仕成2
1. 海军驻武汉438厂军事代表室，湖北 武汉 430064；2.武汉工程大学理学院，湖北 武汉 430074
Author(s):
YANG Zhichun1;  WU Feng2;  YU Shicheng2
1 Navy Representative Office of 438 Factory, Wuhan 430064, China;
2 School of Science, Wuhan Institute of Technology, Wuhan 430074, China
关键词:
熵产率; 优化频率; 针束型回热器; 热声; 不可逆性
Keywords:
entropy generation rate;  optimization frequency;  pinarray stack;  thermoacoustic;  irreversibility
分类号:
TB131
DOI:
103969/jissn16742869201209012
文献标志码:
A
摘要:
回热器是热声装置的关键部件，在多种具有规则流道的回热器结构中，针束型结构是综合性能最优的结构.针对针束型回热器参数优化问题，建立了以最小熵产率为目标的优化模型，研究基于不可逆性的回热器参数优化方法.通过分析工质在回热器内振荡时由于与固壁的换热和黏性扩散导致的热动力学上不可逆性，对工质在针束型回热器内运动时的熵产率进行了理论分析和数值计算.计算获得了回热器截面分布和截面平均熵产率表达式，分析了针束型回热器中不同位置截面分布熵产率的变化规律，分析了温度梯度对截面平均熵产率的影响，获得了给定特征尺寸截面平均熵产率最小时的最优频率和最优阻抗比.
Abstract:
The stack is the key element of thermoacoustic engines, and pinarray stack has excellent performance compared with other stack geometries. In the case of parameters optimization of pinarray stack, a minimum entropy generation rate optimization model was established to study parametric optimization of stack based on irreversibility. Based on the analysis of the thermodynamic irreversibilities produced by heat transfer and viscous dissipation, the theoretical study and the numerical calculation on entropy generation rate in pinarray stack with the oscillating working gas have been done. Crosssection entropy generation rate distribution and crosssection average entropy generation rate were obtained, the variation law of entropy generation rate in different crosssection of pinarray stack was analyzed, and effect of temperature gradient on crosssection average entropy generation rate was studied. For the fixed characteristic dimension and the minimum crosssection average entropy generation rate, the optimization frequency and the optimization impedance ratio were obtained.

参考文献/References:

［1］吴锋, 李青, 郭方中, 等. 热声理论的研究进展\[J\]. 武汉工程大学学报, 2012, 34(1): 16.
［2］Swift G W. Thermoacoustic engines\[J\]. J Acoust Soc Am, 1984, 84(4): 11451180.
［3］Tominaga A. Thermodynamic aspects of thermoacoustic theory\[J\]. Cryogenics, 1995, 35(7): 427440.
［4］Hofler T J. Thermoacoustic refrigerator design and performance\[D\]. San Diego: Physics Department, University of California at San Diego, 1986.
［5］Swift G W. Analysis and performance of a large thermoacoustic engine\[J\]. J Acoust Soc Am, 1992, 92(3): 15511563.
［6］Swift G W, Keolian R M. Thermoacoustics in pinarray stacks\[J\]. J Acoust Soc Am, 1993, 94(2): 941943.
［7］Hayden M E, Swift G W. Thermoacoustic relaxation in a pinarray stack\[J\]. J Acoust Soc Am, 1997, 102(5): 27142721.
［8］Gibson R J, Nessler F S, Keolian R M. Measurements of a thermoacoustic pin stack\[J\]. J Acoust Soc Am, 1996, 100(4): 27352742.
［9］Bejan A. The thermodynamic design of heat and mass transfer processes and devices\[J\]. Heat and Fluid Flow, 1987, 8(4): 398406.
［10］Bejan A. Entropy generation through heat and fluid flow\[M\]. New York: Wiley, 1982.
［11］Shohel Mahmud, Roydon Andrew Fraser. The Thermoacoustic irreversibility for a singleplate thermoacoustic system\[J\]. International Journal of Heat and Mass Transfer. 2006, 49: 34483461.
［12］Hadi Babaei, Kamran Siddiqui. Design and optimization of thermoacoustic devices\[J\]. Energy Conversion and Management, 2008, 49: 35853598.
［13］Ishikawa H, Hobson P A. Optimisation of heat exchanger design in a thermoacoustic engine using a second law analysis\[J\]. Heat mass transfer, 1996, 23(3): 325334.
［14］吴锋, 陈林根, 孙丰瑞,等.斯特林机的有限时间热力学优化\[M\]. 北京: 化学工业出版社, 2008.
［15］余仕成. 平板型回热器的不可逆熵产率分析\[J\]. 武汉化工学院学报, 1999, 21(2): 8589.
［16］余仕成, 王克协, 吴锋. 钢丝型回热器的不可逆熵产率分析\[J\], 吉林大学自然科学学报, 1999, 3: 5256.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20120910基金项目：国家自然科学基金项目（51176143）；中国科学院低温工程学重点实验室开放课题（yoas011101）作者简介：杨志春(1982), 男, 江西星子人, 工程师, 博士. 研究方向：热能动力装置优化.
更新日期/Last Update: