[1]王传新,谢海鸥,汪建华,等.镍纤维管改善锂硫电池性能[J].武汉工程大学学报,2013,(03):38-42.[doi:103969/jissn16742869201303008]
WANG Chuan xin,XIE Hai ou,WANG Jian hua,et al.Lithiumsulfur battery performance improved by nickel fiber tube[J].Journal of Wuhan Institute of Technology,2013,(03):38-42.[doi:103969/jissn16742869201303008]
点击复制
《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]
- 卷:
-
- 期数:
-
2013年03期
- 页码:
-
38-42
- 栏目:
-
资源与土木工程
- 出版日期:
-
2013-03-31
文章信息/Info
- Title:
-
Lithiumsulfur battery performance improved by nickel fiber tube
- 文章编号:
-
16742869(2013)03003805
- 作者:
-
王传新; 谢海鸥; 汪建华; 谢秋实; 李天明
-
武汉工程大学湖北省等离子体化学与新材料重点实验室,湖北 武汉 430074
- Author(s):
-
WANG Chuanxin; XIE Haiou; WANG Jianhua; XIE Qiushi; LI Tianming
-
Key Laboratory of Plasma Chemistry and Advanced Materials of Hubei Province, Wuhan Institute of Technology, Wuhan 430074, China
-
- 关键词:
-
化学镀; 中空镍纤维管; 锂硫电池; 正极材料
- Keywords:
-
electroless plating; hollow nickel fiber tube; lithiumsulfur battery; cathode material
- 分类号:
-
TM912.9
- DOI:
-
103969/jissn16742869201303008
- 文献标志码:
-
A
- 摘要:
-
为了改善锂硫电池的比容量和循环稳定性等电化学性能,以聚丙烯腈纤维为基体,采用无钯活化化学镀法在其表面镀一层镍,制备得到复合纤维.通过热处理去除复合纤维中的聚丙烯腈,得到氧化镍中空纤维,然后在氢等离子体气氛中对氧化镍中空纤维进行还原制备中空镍纤维管,并以它作为锂硫电池正极材料活性物质的承载体,制备含镍纤维管的硫电极来改善锂硫电池的电化学性能.采用扫描电子显微镜和X射线能谱仪表征镍纤维管的表面形貌和成分,结果表明:所制备的纤维管主要是镍,但含有少量的磷,可能是镀液中次磷酸盐中的磷元素被还原,且管径为10~15 μm,管壁厚度均匀,约0.7 μm.采用恒流充放电和交流阻抗谱对含镍纤维管硫电极的电化学性能进行表征,结果表明:添加镍的纤维管能够增强锂硫电池的电化学性能,在充放电电流密度为每平方厘米0.2 mA的条件下,镍纤维管增强硫电极的首次放电比容量为941.6 mAh/g,20次循环后的放电比容量仍保持在593.3 mAh/g,表现出较高的放电比容量和良好的循环稳定性.
- Abstract:
-
To improve lithium sulfur battery electrochemical properties, such as specific capacity and cycling stability, by depositing a layer nickel on the surface of polyacrylonitrile matrix, the composite fiber was prepared using palladiumfree activation electroless plating method. The polyacrylonitrile matrix was removed by thermal treatment so as to gain hollow nickel oxide fiber tube. Then, the resulting nickel oxide was reduced under hydrogen plasmas atmosphere and hollow nickel fiber tube was obtained. Sulfur electrode was prepared by adding the prepared nickel fiber tube,which was used to load the active material of lithiumsulfur battery. Surface morphology and composition of nickel fiber tube were characterized by scanning electron microscopy and energy dispersive Xray spectrometry. The results show that the obtained nickel fiber tube consists of major nickel and a small amount phosphorus. The diameter and the thickness of uniform nickel fiber tube are 10~15 μm and about 0.7 μm, respectively. Electrochemical performance of sulfur electrode, containing nickel fiber tube, was tested by constant current chargedischarge and electrochemical impedance spectroscopy. The results indicate that the fiber tube adding nickel can enhance the electrochemical performance of lithiumsulfur battery. When current density is 0.2 mA/cm2, initial discharge specific capacity of sulfur electrode which is enhanced by nickel fiber tube, is 941.6 mAh/g and the discharge capacity remains 593.3 mAh/g after 20 cycles, and the cell exhibits high discharge specific capacity and good cycle stability.
参考文献/References:
[1]Marmorstein D,Yu T H,Striebel K A,et al. Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes \[J\]. J Power Sources,2000,89(2):219226.[2]Chu MayMing. Rechargeable positive electrodes:US 5814420 \[P\].19980929.[3]Yamin H,Peled E. Electrochemical of a nonaqueous lithium/sulfur cell \[J\]. J Power Sources,1983,99(3):281287.[4]Xiangming He,Weihua Pu,Jianguo Ren,et al. Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries \[J\].Ionics,2008,14(4):335337.[5]Shim J,Stiebel K A,Cairas E J. The lithium/sulfur rechargeable cell \[J\]. Journal of the Electrochemical Society,2002,149(10):13211325.[6]Xiulei Ji,Kyu Tae Lee,Linda F Nazar. A highly ordered nanostructured carbonsulfur cathode for lithiumsulfur batteries \[J\]. Nature material,2009,8:500506. [7]张文华,陈瑶,艾新平,等. 硫/介孔碳复合正极材料的制备与表征 \[J\]. 电化学,2010,16(1):1619.[8]赵春荣,余仲宝,王维坤,等. 纳米碳纤维硫正极电化学性能 \[J\]. 电化学,2009,15(1):8890.[9]Guangyuan Zheng,Yuan Yang,Judy J Cha,et al. Hollow carbon nanofiber encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries \[J\]. Nano letters,2011,11(10):44624467.[10]Sun Mingming,Zhang Shichao,Jiang Tao,et al. Nanowire networks of sulfurpolypyrrole composite cathode materials for rechargeable lithium batteries \[J\]. Electrochemistry Communications,2008,10(12):18191822.[11]喻献国,解晶莹,黄海江,等. 二次锂电池用导电含硫聚合物正极材料的结构表征及电化学性能 \[J\]. 中国有色金属学报,2004,14(3):354360.[12]Yuan L X,Qiu X P,Chen L Q,et al. New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy \[J\]. Power Sources,2009,189(1):127132.[13]Thomas M G S R,Bruce P G,Goodenough J B. AC impedance analysis of polycrystalline insertion electrodes: application to Li1xCoO2 \[J\]. Electrochem Soc,1985,132:15211528.[14]Zaban A,Zinigard E,Aurbach D. Impedance spectroscopy of Li electrodes part 4: a general simple model of the Lisolution interphase in polar aprotic systems \[J\]. Phys Chem,1996,100:30893101.[15]Ely Y E,Aurbach D. Langmuir,Identification of surface films formed on active metals and nonactive metal electrodes at low potentials in methyl formate solutions \[J\]. Langmuir,1992,8(7):18451850.[16]Aurbach D,EinEli Y,Markovsky B,et al. The study of Li of electrolyte solutions based on ethylene and diethyl carbonates (ECDEC) for rechargeable Li batteries \[J\]. Electrochem Soc,1995,142:28822890. [17]王洪波,程方益,陶占良,等. 锂离子电池负极材料ZnMn2O4微米空心球的制备和电化学性能 \[J\]. 无机化学学报,2011,27 (5):816822.[18]刘蓉芳,程方益,陶占良,等. TiO2纳米管阵列制备及其电化学嵌锂性能研究 \[J\]. 无机化学学报,2011,27 (6):10211026.[19]Wu F,Wu S X,Chen R J,et al. Electrochemical performance of sulfur composite cathode materials for rechargeable lithium batteries \[J\]. Chinese Chemical Letter,2009,20:12551258.
备注/Memo
- 备注/Memo:
-
收稿日期:20121128基金项目:国家重点基础研究发展计划(No.2011CB201600);湖北省自然科学基金(No.2007ABA006);湖北省教育厅重点项目(2007)资助项目作者简介:王传新(1965),男,湖北荆门人,教授,博士.研究方向:低温等离子体技术及其应用.
更新日期/Last Update:
2013-04-23