|本期目录/Table of Contents|

[1]张勇,周莹莹,沈玉明,等.生石灰粉磨段收尘灰制备轻质碳酸钙工艺[J].武汉工程大学学报,2013,(09):7-12.[doi:103969/jissn16742869201309002]
 ZHANG Yong,ZHOU Ying\|ying,SNEN Yu\|ming,et al.Preparation technology of light calcium carbonate from received flue dust of quicklime powders grinding[J].Journal of Wuhan Institute of Technology,2013,(09):7-12.[doi:103969/jissn16742869201309002]
点击复制

生石灰粉磨段收尘灰制备轻质碳酸钙工艺(/HTML)
分享到:

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2013年09期
页码:
7-12
栏目:
资源与土木工程
出版日期:
2013-10-10

文章信息/Info

Title:
Preparation technology of light calcium carbonate from received flue dust of quicklime powders grinding
文章编号:
16742869(2013)09000706
作者:
张勇1周莹莹1沈玉明2罗华平2刘鹏达1
1.武汉工程大学材料科学与工程学院,湖北 武汉 430074;2.攀钢集团矿业有限公司石灰石矿,四川 攀枝花 617065
Author(s):
ZHANG Yong1 ZHOU Ying\|ying1 SNEN Yu\|ming2 LUO Hua\|ping2LIU Peng\|da1
1.School of Materials Science andEngineering of Wuhan Institute of Technology, Wuhan 430074,China;2.Lime Stone Mine of PanzhihuaIron and Steel Group Minerals Co., LTD, Panzhihua 617065,China
关键词:
收尘灰碳化法水化
Keywords:
received flue dust carbonization method hydration
分类号:
TQ132.32
DOI:
103969/jissn16742869201309002
文献标志码:
A
摘要:
为充分利用石灰石矿的粉矿资源并减少二氧化碳尾气排放,以生石灰粉磨工段收尘灰为原料,利用立窑尾气通过碳化法制备了轻质碳酸钙.首先使用x\|射线电子能谱及筛分法对收尘灰的成分及粒度分布进行了测定,然后探讨了水化温度和水化时间对水化过程的影响,并使用扫描电镜对水化产物的形貌进行了研究,最后研究了碳化温度和碳化时间对水化产物碳化过程的影响,并研究了产物形貌.结果表明,其最佳工艺条件为:将收尘灰于100 ℃条件下水化5~8 h,然后使用立窑尾气碳化10~20 min,可得到粒度分布均匀的轻质碳酸钙粉体,部分碳酸钙结晶为针状,可用于塑料制品的补强.通过该方法的制备的碳酸钙产品可达到化工行业标准《HG/T 2226\|2000》所规定的质量要求.
Abstract:
To make full use of the calcium oxide powders resources and reduce the exhaust gas in lime stone production, light calcium carbonate was prepared by carbonization method using received flue dust of quick lime powder grinding as raw material via carbon dioxide gas of the exhaust .The composition and particle distributing of the received flue dust were tested firstly by X\|ray electron spectroscopy and sieve method, then the effect of hydration time and temperature on hydration process was studied and the surface morphology was revolved by scanning electron microscope, eventually the carbonization conditions such as time and temperature of the hydration products were determined and the surface morphology of calcium carbonate was also studied. The results show as fellows: the optimum conditions are that the received flue dust is hydrated at 100 ℃ for 5-8 h, then the hydration product is carbonized via carbon dioxide gas of the exhaust for 10-20 min, and the calcium carbonate powders with uniform size distribution are obtained, in which some of particles are needle\|like and can be used as plastic reinforcing agent. By this method, the character of produced calcium carbonate powders is matched with the chemistry industry standard of HG/T 2226\|2000.

参考文献/References:

\[1\]韩金荣.轻质碳酸钙的应用及其发展前景\[J\]. 石油化工应用,2009,28(2):4\|5.HAN Jin\|rong.The Application and Foreground of Light Calcium Carbonate\[J\].Petrochemical Inoustry Application,2009,28(2):4\|5.\[2\]程庆龙.浅论轻质碳酸钙的应用与发展\[J\].硅谷,2010(7):2.CHENG Qing\|long. On the Application and Development of Calcium Carbonate\[J\].Silicon Valley,2010(7):2.\[3\]陈贤树,盖国胜,李华健.轻质碳酸钙分散、改性装置的研究\[J\].化工矿物与加工,2004(3):18\|20. CHEN Xian\|shu,GAI Guo\|sheng,LI Hua\|jian. Study on Dispersion and Modification Devices of Precipitation Calcium Carbonate\[J\].Industrial Minerals And Processing,2004(3):18\|20.\[4\]马毅漩.纳米碳酸钙及其应用\[J\].涂料工业,2000(10):39\|42. MA Yi\|xuan. Nano Calcium Carbonate and its Application\[J\].Paint & Coatings Industry,2000(10): 39\|42.\[5\]潘鹤林.活性CaCO3粉末表面性能研究\[J\].无机盐工业,1997(1):11\|12.PAN He\|lin. Surface Active Properties of CaCO3 Powder\[J\].Inorganic Chemicals Industry,1997(1): 11\|12.\[6\]胡庆福,胡晓湘,宋丽英.中国碳酸钙工业生产现状及其发展对策\[J\].中国非金属矿工业导刊,2004(4):3\|7.HU Qing\|fu,HU Xiao\|xiang,SONG li\|ying.The Status and Developing Measures on the Production of Calcium Carbonate in China\[J\].China Nonmetallic Mining Industry Herald,2004(4):3\|7.\[7\]邱建明.崔英德.碳化法生产轻质碳酸钙工艺过程分析\[J\].广州化工,2001,29(4):18\|20. QU Jian\|ming,CUI Ying\|De.Technical Process Analysia for the Production of Light Calcium Carbonate by Carbonization\[J\].Guang Zhou Chemical Industry and Technology,2001,29(4): 18\|20.\[8\]郭华林.轻质碳酸钙生产设备与工艺的选择\[J\].化工设计通讯,2000,26(4):35\|38. GUO Hua\|lin.The Production Equipment and Process Selection of Precipitated calcium carbonate\[J\].Chemical Engineering Design Communications,2000,26(4):35\|38.\[9\]颜鑫,刘跃进,王佩良.我国超细碳酸钙生产技术现状、应用前景与发展趋势\[J\].中国粉体技术,2002,8(4):38\|41.YAN Xin,LIU Yue\|jin,WANG Pei\|liang.Production Technology and Applied Prospect of Superfine Calcium Carbonate\[J\].China Powder Science and Technology,2002,8(4):38\|41.\[10\]张春月,陈英军,韩恒朝.我国轻质碳酸钙应用的市场前景\[J\].干燥技术与设备,2006,4(1):21\|23.ZHANG Chun\|yue,CHEN Ying\|jun,HAN heng\|chao.Application and Market Forground of Calcium Carbonate in China\[J\].Drying Technology& Equipment,2006,4(1):21\|23.\[11\]王小龙.轻质碳酸钙及其生产工艺\[J\].上海建材,1999(1):25.WANG Xiao\|long. The production process of Light calcium carbonate\[J\].Shanghai Building Materials, 1999(1):25.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期:20130626作者简介:张勇(1976\|),男,湖北汉川人,副教授,博士.研究方向:材料化学.
更新日期/Last Update: 2013-10-11